Talks

[fr4nk]

das hab ich scho 3mal oder so hinter mir gehabt, scheiss prog *g*, naja jetzt funzt es ja,
wenn de es auf der mmc installiert hast kannste es ja mal probieren ohne mmc starten, dann die stift taste gedrückt halten, bis de wenn du glück hast dein pin eingeben "darfst" auch wenn 100 mal programm geschlossen kommt, dann wird dir nix anderes übrig bleiben dein handy zu formatieren, einfach *#7370# eintippen!!!!Formatiert das komplette Serie60 Handy (ACHTUNG: Keinesfalls den Akku entfernen!! Der Vorgang dauert einige Minuten, UNBEDINGT abwarten!)!!!!
, dann sperrcode glaub 123456 und ALLES ist standard, also alle einstellungen, alle kontakte sind weg usw. naja ich wünsch dir viel glück

fr4nk

bevor ichs noch vergess, notfalls gang zum nsc wagen, und ne gute ausrede einfallen lassen, nachm FW update müsste es auch wieder funzen!

[blinky27]

Wo gibt es nun das Programm ? Im 3650_bunker finds ich nicht.

Blinky

[freak1704]

Original von ronny0510
mit dem progis kann man sich sms vorlesen lassen und es spricht bei jeder aktion, die man bei dem tel vornimmt. also es quatsch immer zu ,bei jeden druck einer taste ... total nervig und müll, zumal die stimme sich schon .... anhört



wers brauch"" 3650_bunker ""

Würde mich auch mal gern mit dem Proggi auseinandersetzen.

Aber in dem Bunker isses nich!

Hat noch jemand eine Group mit dem Teil gefunden?

Scheint ja recht unbekannt zu sein, da es noch nicht mal ein Review bei aikon.ch gibt... ?

[fr4nk]

tja da wurde es wohl gelöscht,
war so net und hab es im bunker wieder hochgeladen!
schaut mal in upload ordner
viel spass
!!passt aber auf mit der installation!! erst die speechworks***,** dann die talks60.sis!! sonst geht nix *g*

fr4nk

[blinky27]

Vielen Dank dafür.

Ist übrigens die Demoversion

Blinky

[fr4nk]

ja ich weiss dumme, demo, blabalba,lizenz ist abgelaufen usw.

wer nett wenn jemand mal nen link oder sonst was von talks posten könnte damit wir mal sehen ob es auch ohne zu "kaufen" gibt*g*

fr4nk

[backspace]

Bitte mir auch die vollversion senden oder einen code usw:

Wenn ihn einer hat .

monamez@yahoo.de


Danke euch ...

[GROUPGLOBAL]

TALKS for Series 60 Betaa 2003-09-05
====================================


1. Installation
---------------

We recommend that you use a Nokia 3650 for this beta-release of
TALKS. This allows you to install TALKS to the MMC card, so it is easy
to get the phone back to work in case anything terrific should happen
(see troubleshooting). This is beta software, so we cannot guarantee,
that it will work without problems.

The Nokia PC Suite for the phone you have must have been installed and
be working prior to installing TALKS. Since Infrared connections are
easy to use, while Bluetooth requires a pairing process, we recommend
that you use infrared. You should not try to install Bluetooth, before
TALKS is working on your phone, unless you have sighted help!

To install TALKS, you first have to install the SpeechWorks*.sis file
for your language. If your language is not yet supported, first set
the phone's display language to English. You can do this from within
the Tools/Settings/Phone/General selection. After you have changed the
language, your phone will reboot and use the new language.

After the SpeechWorks*.sis file has been installed successfully, you
are ready to install the TALKS60_*.sis file. After the installation,
TAlKS should speak quite immediately.

IMPORTANT! When installing an update to the SpeechWorks*.sis file,
i.e. a new text-to-speech engine, first turn off TALKS by executing
the TALXOFF command in the main phone menu! This prevents TALKS from
trying to access the TTS engine while the new version is installed. No
special precaution is needed when just installing TALKS.

To register TALKS for the beta period, you have to call up the TALKS
Settings window, then call up the Options menu with softkey 1, and
select "Register". You will hear the IMEI number, and can enter the
serieal code that you can get from us when giving us your IMEI. This
will allow you to fully use TALKS free of charge until the beta period
is over. You can also display the IMEI number by entering *#06# inside
the Phone application.


2. Keypad Description
---------------------

The flat power on/off key is located at the top edge.

The left soft key, located at the edge directly under the display, is
called [Key 1]. The other software, located to the right of this key is
called [Key 2].

The round buttons below these keys are the [Call] key (left), and the
[End] key (right). The small round buttons below these keys are called
[Edit] (left) and [Back] (right).

The concave button in the middle of the keypad is a five-direction
key: [Left], [Right], [Up], [Down], and [Select].

The number keys start with [1], directly to the left of the concave
key, and they are arranged like a circle, with a knob on [5], and
ending with [0], immediately to the right of the concave key. This is
almost like a rotary phone.

On the inside of this circle, you can find[*] (left), [#] (right),
and [Menu] (at the bottom, above [5] and [6]).


3. TALKS Commands
-----------------

The [Edit] key is the [TALKS] key.

Functions:

[TALKS],[Key1] = Read function keys
[TALKS],[Key2] = Read status information
[TALKS],[CALL] = Re-read window
[TALKS],[EXIT] = Read time and date
[TALKS], [Back] = Disable/enable speech
[TALKS],[1] = Change key echo
[TALKS],[2] = Upper case announcement on/off
[TALKS],[3] = Phonetic spelling on/off
[TALKS],[4] = Change Punctuation announcement
[TALKS], [5]/[6] = Lower/Higher volume (not yet supported by
Eloquence)
[TALKS], [7]/[8] = Decrease/Increase speech rate
[TALKS],[0] = Toggle learning mode
[TALKS], [up] = Read current line or selected object
[TALKS], [Left] = Read word under cursor
[TALKS], [Right] = Read character under cursor
[TALKS], [Down] = Read text from cursor position until EOT
[TALKS],[Select] = Re-read recent utterance
[TALKS],[#] = Re-read previous utterance
[TALKS][*] = Call up the TALKS Settings dialogue.


4. Tips
-------

* Inside the Phone application, which is the first application loaded
when restarting the phone, the following short-cuts can be used:
+ [Key1],[*] in rapid sequence = Lock / Unlock keypad
+ [Key2] pressed long = Call by using a voice tag (silence speech
for best results)
+ [CALL] without a number entered = List of dialed numbers
+ [Select] = Contact application
+ [1], ..., [9] pressed long = call short-dial number
+ }0] pressed long = Call up WAP browser

Please note that the default meaning of the two softkeys right below
the display can be changed to call up any application. So, you can,
for instance, set [Key1] = Messaging, and [Key2] = Calendar, and
have very quick access to the most important applications by
pressing only one button.

* Short-cuts that work everywhere:
+ [End] = Go to Phone application
+ [Menu] pressed long = Call up task list

+ You can switch the menus from their default grid view to list view,
which is perhaps nicer for many of us. To do this, press [Key1]
(Options) inside the main phone menu, then select "List View".

* The [Select] key can be used to select menu items, and also usually
gives a smaller selection of the most important options, while
[Key1] often displays a list with more options.


5. Known Issues
---------------

This does not cover everything, but lists the most important issues
you may run into. We plan to fix most of these, before releasing the
first version of TALKS for Series 60.

* Though it is possible to mute a ring tone by pressing [Key2], when a
call comes in, TAlKS will not read the caller ID in this beta
version. This is concidered an important issue that we will fix
asap.

* On some phones, we have experienced a crash of one instance of
TALKS, when the phone has been turned off, without shutting down the
speech engine. Because of this, we recommend that you press
[TALKS],[Back], before switching off the phone. When the crash
occurs, you still can use speech in all other parts of the phone, so
you can call TALXOFF in the main menu, then TALXON to get TALKS
working again.

* TALKS cannot recognize graphics on Series 60 right now. Because of
this, only numbers are read for any graphics, and the slider
settings cannot be read in a list. However, when you open the window
to adjust the slider, like for Speed or Volume, the values are read
out correctly.

* The WAP browser, the Calculator, and the Product Info application
are not yet supported by TALKS. However, you can enter "*#0000#" in
the Telephone application to get the firmware version, and *#06# to
read the IMEI number. We are not sure that we can make WAP
accessible in the first release, but plan to do it as soon as we get
specific information from Nokia.

* At certain places, we have to implement an automatic silent mode for
TALKS. For instance, when a call is in progress, any speech output
silences the actual conversation, no party can hear the other party
durring an utterance. We recommend that you silence TAlKS during a
call, by pressing [TALKS], [Back] in such situations. This has a
very high priority, and will be fixed in the release version.

* We have not yet implemented a virtual cursor, that allows you to
read SMS messages etc. line by line, word by word, or letter by
letter.

* To completely read a help text or long message, you have to press
[TALKS],[Down] repeatedly.

* The program "Extended Profiles Pro" from Psiloc crashes the
announcement of the status indicators with [TALKS],[Key 2]. We
recommend that you do not use this program right now.

* The Eloquence version that is used with the current test drive of
TALKS is also in beta state. When entering letters, we have noticed
that the delay between the utterance of letters is too long. So, you
only know what you have typed in when the letter has already been
inserted into the text. We are working with Scansoft, to find a
solution for this problem.

* The handling of keyboard input has to be improved, by accessing
keystrokes at a lower level. Right now, for example, you can hear a
tone when pressing [TALKS], followed by a number key, inside the
Phone application. And when entering [TALKS], [End], to read the
current time and date, you always land in the Phone application,
like when pressing [End] alone.

5. Troubleshooting
------------------

If you ever should run into serious trouble, for instance, a constant
rebot occurs, you can take out the memory card, and reboot the phone.
Though you may get a few errors, the phone should work OK. Then you
can start "TALXOFF" from within the menu, insert the MMC again, and
reboot the phone. This allows you to get out of any problems that may
be caused by TALKS, if you have followed our advice and installed it
to the memory card.

[fr4nk]

also ich hab noch nix von ner vollversion gehört!
aber falls doch wär ich net für ein hochladen in einer yahoo group oder so

fr4nk

[freak1704]

Äh...

Moment mal...

Hab grad nach Talks gegoogelt und http://www.talx.de/ gefunden.

Nach dem, was die da schreiben, ist das Teil nur für den Commi entwickelt worden.

Das könnte erklären, warum es Probleme auf dem 36/7650 verursacht.

Oder steh ich da im Wald und es gibt noch ne andere Version???

[blinky27]

Haste mal in der FAQ auf der Seite mal den Punkt 16 angesehen ?

Dort steht nähmlich das die gerade an einer Version für den 3650 arbeiten.

Dabei muß noch erwähnt werden das die FAQ vom Mai 2003 ist.



Blinky

[GROUPGLOBAL]

Hier für die italienischen Freunde unter uns:

KLICK

[Spider1983]

Ich habe bei einigen hier gelesen, dass sie das Prog im 3650_Bunker nicht finden. Ich war heute dort und schaut mal im upload-Ordner nach. Da ist es.

[blinky27]

Spider anscheind hast Du das Thema hier wohl überflogen.
Den der fr4nk hat es nähmlich extra nochmal hochgeladen weils weg war.

Blinky

[Spider1983]

SORRY